PlayStation spares and accessories

Home | Contact Us | Testimonials | Help | News | View Cart | Checkout

PS1 Spare Parts
PS1 Memory Cards
PS1 Controllers
PS1 Cables
PS1 Adaptors

PS2 Spares
PS2 Memory cards
PS2 Controllers
PS2 Cables
PS2 Adaptors
PS2 Accessories
Kynar Wire
PIC Programmer
Power Inverter
R/C Toys

General Help

PlayStation Spindle fitting instructions (For original & PSone console)

Please read and understand this document completely before undertaking the installation.

Tools and Items Required
Phillips (Cross Head) Screwdriver
Jewellers Phillips (Cross Head) Screwdriver
Flat blade screwdriver (5-10mm tip)

Initial Checks
When repairing somebody else's Playstation test it first and make sure it works (apart from the spindle of course!).

CAUTION:
Disconnect all cables and remove any discs prior to disassembly. Mains electricity can be fatal. Keep track of where the screws and internal components go as the machine is disassembled.

Removal of the console cover:
Remove the mains supply lead to the Playstation then remove the front cover by unscrewing the screws underneath the Playstation.

Removal of the Laser Unit Assembly:
Once the front cover is removed remove the small white plug from the board to the laser unit.
Remove the ribbon cable from the laser unit to the board by gently pulling the ribbon straight up. (Note: On the older style board this ribbon cable is clipped in and the clip should be released before pulling the ribbon)
Once the two cables from the laser to the board are removed lift the laser off and place your console and screws somewhere safe.

Dismantling the Laser Unit:
Move the lens into its mid position, otherwise the lens will get in the way of the cover if it is left in its rest position. Now follow the directions below, note that when taking the cover off little plastic "lugs" need to be free of the main frame in order for the cover to be removed

Once the cover is off you can prise the broken spindle off of the motor using a flat blade screwdriver, but before you do this, make a note of how far the current spindle is on the motor shaft. Fit the new spindle and push onto the motor shaft so that the spindle is positioned exactly as your original spindle was on the motor shaft.

Re-assembly:
Re-assembly is to be done exactly in reverse order, but you do not have to move the lens back to its original position, the Playstation console will do this when power is next applied to the system.

 

Disclaimer: The manufacturer and supplier of this product are not liable for misuse of this product. Misuse includes improper installation, damage to the console while trying to install. Opening your console will invalidate any outstanding warranty it may have.

 
Footer

© 2003 www.psxspares.co.uk. All rights reserved.
Sony PlayStation and PlayStation 2 are trademarks of Sony Corporation.
XBox is a trademark of Microsoft Corporation.
www.psxspares.co.uk is not affiliated with any of the above companies in any way.